What are the safety points of the molding machine?

- May 27, 2019-

Safety operation points of the sand molding machine

1. When using the sand molding machine, the operator should be familiar with the mechanical parts, electrical parts, operating procedures, lubrication systems, etc. of the molding machine, as well as other requirements specified in the use of the equipment.

The molding machine compacts the sand type program in 4 steps: tapping, indenting, compacting, indenting.

Molding machine mold-up procedure: workbench clamping, lifting rod lifting, transporting sand box, chassis reset.

2. When using the sand molding machine, before starting the equipment, check whether the lubrication device of the molding machine is perfect, and refuel according to the regulations, check whether the tight parts are tight, whether the operation handles are in the zero position (vacancy), and whether the air valve action is Flexible, the pipeline has no air leakage, and then open the total air valve to release the accumulated gas and water in the pipeline.

3. It is strictly forbidden to open an empty car. It must be tested under the condition of load, check whether the working conditions are normal, and refuel the place where it should be refueled. Work can be done after the test run is normal.

4. When using the molding machine, it is necessary to carefully observe the operation. In the operation, the sand of the lubrication part and the running part should be cleaned by air frequently. It is strictly forbidden to stick sand to each lubrication part.

5. When using the molding machine, the action should be smooth when opening and closing the handle valve.

6. After each styling work is completed, the workbench should be cleaned up before the second styling work can begin.

7. After the sand molding machine is used, return the handle to the zero (empty) position, close the valves, clean the equipment, clean the site, keep the sliding and rotating parts of the equipment clean, and carefully check the tools and molds.

SAND molding machine

Sand molding machine,if you want to know more details like manufacturers? machine function? support video and more pictures? price list? how to buy? welcome to Send Inquiry or Chat Now or send us Email about any question on the machine, please contact us >>> salse16@chinamakeco.com