How to solve the sand molding machine's shock or weakness?

- Apr 09, 2019-

There are several reasons for the shock or weakness of the sand molding machine.

1. The molding machine fault detection encounters air filter gas blockage. Because the vacuum pump works to produce some water, the filter element in the air filter gas is blocked by adding some foreign matter in the pipeline for a long time. The pressure gauge looks at this time. The pressure is not small, but the air flow is not enough, causing the machine to be weak.

2. Due to long-term vibration, the following molding machine failures will occur: 6 M20 hexagonal nails connected to the arresting table and the shock piston are loose, so that there is a gap between the shaking table and the piston, and the working airflow leaks from here, causing a shock. Powerless, especially after compaction, can not be shocked.

3, the piston and the pump iron are not lubricated, rusting, can also cause shock and weakness, solve the problem of the molding machine, can open the rubber tube to the earthquake table, inject a pound of kerosene or gasoline, and then go up, When the shock is turned on, the sound of the shock will change significantly.



Brass zinc die casting machine, if you want to know more details like manufacturers? suppliers? factory? machine function? price list? how to buy? please Send Inquiry. Any question on foundry casting machine, sand molding machine, CNC machining center machine etc., please contact us >>> 

salse16@chinamakeco.com