How to use the horizontal parting flaskless molding machine ?
1. When using the molding machine, the operator should be familiar with the mechanical parts, electrical parts, operating procedures, lubrication systems, etc. of the molding machine, as well as other requirements specified in the use of the equipment.
The molding machine compacts the sand type program in 4 steps: tapping, indenting, compacting, indenting.
Molding machine mold-up procedure: workbench clamping, lifting rod lifting, transporting sand box, chassis reset
2. When using the molding machine, before starting the equipment, check whether the lubrication device of the molding machine is perfect, and refuel according to the regulations, check whether the tight parts are tight, whether the operation handles are in the zero position (vacancy), and whether the air valve action is Flexible, the pipeline has no air leakage, and then open the total air valve to release the accumulated gas and water in the pipeline.
|Size Of Appearance Of Machine||2570 * 1620 * 2490 mm|
|The Biggest Size Of Sand Mold||350 * 450 mm|
|Compaction Pressure||not more than ( 40-80 ) kg|
|The Thickness Of Sand Mold||( 80~150 ) * 2 ( mm )|
|The Speed Of Manufacturing Mold||28 sec / mold|
|Machine Total Power||10 kw|
|Air Comsumption ( Normal / Mold)||0.3 m³|
|Power Supply||380V 50Hz|
Humidity Of Sand Mold
|2.5 % ~ 3 %|
The Thickness Of Template
|15 ~ 25 mm|
* some parameters can be customised by client's requirement.
Other Hot Sale Sand Molding Machines(know more details,please contact us>>>)