1. Sturdy four-column guide opening and closing mechanism for smooth movement.
2. The combined cylinder is reverse mounted, and the opening force is greater than the combined force.
3. Configure the left and right die two core-pulling mechanisms, and the core-cylinder cylinder is reverse-mounted, so that the piston rod end of the cylinder is away from the heat source, effectively extending the service life of the cylinder seal, and the core pulling force is greater than the ferrule force; the center height of the core cylinder can be Adjust between 180mm - 350 mm.
4. The casting ejector is in the reverse top mode. Above the take-up position, the casting is ejected to the pick-up tray by the anti-ejector rod during the opening.
5. The holding furnace is fixed.
Low pressure aluminum casting machine processing: