1. The large cotton core release molding is transferred on the lower toilet paper by the transfer wheel.
2. The small cotton core is cut and cut after continuous demoulding. After cutting, it is laid flat on the large cotton core and compounded by the upper toilet paper.
3, cotton core through the mesh compaction device, cotton core compression and softness.
4. The dredging layer is cut and cut, and the elastic waist is finished by special equipment.
5, can produce gourd type adult diapers (small, medium, large)
6, the front waist stickers can be directly coated with glue film or online coating, with positioning and cutting function,
7. The vertical layer formed by the non-woven fabrics on both sides and the middle fabric are pressed together, and the elastic degree of the elastic belt is adjusted by the double idler line speed controlled by the frequency conversion.
8. The tightness of the leg elastic band is adjusted by the double idler line speed controlled by the inverter.
9, two groups of left and right paste slitting device
10, there is T-side waist stickers online production function (optional)
11. The bottom mold and the bottom nonwoven fabric are combined online.
12. The arc on both sides of the product is cut out by the R-cutting roller device, and the edge material is sucked away by the negative pressure.
13, R cut longitudinally three folds.
14, three pressure roller flat pressure
15. After the three pressure rollers are transported by the upper and lower conveyor belts, the product is cut into the finished product.